Kidde 10Y29 smoke alarm

Discover the all-new Kidde 10Y29 smoke alarm, with a power to lithium batteries sealed and 10 years warranty ! With this detector, you are still 10 years old.

With a hush button to stop any false alarms and a test button to check its good state of operation, the new smoke detector brand Kidde provide fire protection efficiently to all your family.

Technical characteristics of the Kidde 10Y29 smoke alarm :

• Standalone smoke alarm
• Photoelectric sensor
• 10 year sealed longlife lithium battery
• Test button
• Hush button
• Built-in siren 85 dB at 3 meters.
• Mounting bracket provided
• Acoustic Signal indicating the end-of-life of the smoke detector
• Function of automatic activation during the first installation on the mounting bracket
• Anti-theft system
• Dimensions (H x Dia) : 4.5 cm x 10.5 cm
• Packed weight : 200 grams
• Alarm's life : 10 years
• CE EN14604, NF
• 10 year manufacturer's warranty

Installation of a Kidde 10Y29 smoke alarm :

The implementation of the Kidde 10Y29 smoke alarm is facilitated by its kit of screws and plugs included and the holes already present on the lid of the device.
It only remains for you then to define the right location for your smoke detector and you are protected !

Where to place my smoke detector ?

The pieces that are most recommended are those that tell of life : living room, dining room, office ...
The manufacturer Kidde recommends the arrangement of the smoke detector in the direct vicinity of all of these pieces in a hallway leading to it, preferably in the middle of the ceiling.

In case your home has several floors, it is advisable to have several Kidde 10Y29 : a ground-floor, and then one in the stairs leading to each level and possibly in front of the door of the rooms, if the alert tone is not audible.

Are there any parts to avoid for my smoke detector ?

Kidde recommends that you do not install a detector alarm independent of smoke in a kitchen, a bathroom, a cellar or even an attic. In fact, there may be outgassing of fumes from cooking, water vapour, or dust that trigger a false alert. This is due to the fact that the light sensor inside the smoke detector is very sensitive to the fine particlules of smoke and therefore the other substances are similar.

Test the Kidde 10Y29 smoke alarm :

The Kidde 10Y29 smoke alarm has a Test button, imposed by the european standard, EN14604.
It is useful to verify that your device is always secure.

A support of a few seconds is enough. If the alarm is sounding, this means that the internal circuits are in good operating condition.
In the contrary case, the smoke detector is defective and must be replaced more quickly.

How replace the battery of the Kidde 10Y29 smoke alarm :

The Kidde 10Y29 smoke alarm does not require replacement of the battery since it is sealed for 10 years, that is to say, the duration of use of the product.
The advantages are that the battery is also under warranty and that you get great comfort !

Clean the sensor Kidde 10Y29 smoke alarm :

The maintenance of the Kidde 10Y29 smoke alarm is essential to assure a constant protection against fire.
So, once per year, at a minimum, perform the following steps :

• Epoussetez the slots around the device fire detection using the soft brush of your vacuum cleaner.
• Switch to a shot of a damp cloth on the front of the Kidde 10Y29 smoke alarm.